![background image](http://html.mh-extra.com/html/hilti/nuron-gfb-6x-22/nuron-gfb-6x-22_manual_2135665015.webp)
*2332261*
2332261
English
9
30 mm roller, small
13 mm … 30 mm
(0.5 in … 1.2 in)
30 mm roller, large
13 mm … 30 mm
(0.5 in … 1.2 in)
5.6
Removing the abrasive belt
1. Remove the side handle.
2. Swing the housing cover aside.
3. Turn the eccentric screw until it engages. This relieves the tension on the file arm.
4. Remove the abrasive belt.
5. Slacken the eccentric screw to relieve the tension on the spring of the file arm.
5.7
Adjusting the belt run
1. Adjust the belt run by turning the adjusting screw on the file arm.
2. Select the setting that keeps the belt running centered on the contact roller.
3. Set the speed. → page 10
4. Run the belt at the slowest speed and check your setting.
5.8
Changing the file arm
1. Remove the abrasive belt. → page 9
2. Slacken the adjusting screw.
3. Remove the securing screws and lift off the file arm.
4. Hold the new file arm in position, install the securing screws and tighten them to the specified torque.
Technical data
Tightening torque, securing screws for file arm
2.7 Nm
(2.0 ftlb
f
)
5. Fit the abrasive belt. → page 8
6. Adjust the belt run. → page 9
5.9
Adjusting the swivel arm
1. Slacken the locking screw of the swivel arm.
2. Tilt the swivel to the desired position.
3. Tighten the locking screw.
5.10
Fall arrest
WARNING
Risk of injury
by falling tool and/or accessory!
▶
Use only the
Hilti
tool tether recommended for your product.
▶
Prior to each use, always check the attachment point of the tool tether for possible damage.
Comply with the national regulations for working at heights.
As drop arrester for this product, use only a combination of the
Hilti
retaining strap and the
Hilti
tool tether
#2261970.
▶
Secure the retaining strap to the installation openings for accessories. Check that it holds securely.
▶
Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a
load-bearing structure. Check that both carabiners hold securely.
Comply with the operating instructions of the
Hilti
retaining strap and those of the
Hilti
tool tether.
Summary of Contents for Nuron GFB 6X-22
