Hilti NPR 032 PE-A22, Operating Instructions Manual

Page: 11 / 22

English 7
=
Casing
%
Servicing and fault indicator (red LED)
&
Battery release button
(
Battery
)
Control switch
+
Tubular guard for adjusting (shorten-
ing/extending) the stroke
§
Locking pin for opening/closing the tool
head
/
Crimping jaw holder
:
Pressing ring with adapter jaws
∙
White LED to illuminate the working area
$
Manual piston return switch
3.2 Intended use
The product described is a cordless electro-hydraulic crimping tool.
It is designed for crimping fittings used to connect composite, copper (Cu) and steel pipes.
▶
Use only Hilti lithium­ion batteries of the B 22 series with this product.
▶
Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Possible misuse
• Do not use this hand-held product clamped in a fixed position or as a stationary device.
• This electro-hydraulic crimping tool may not be exposed to heavy rain or used under water.
3.4 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the product are indicated by the indicator of the
Li­ion battery. The state of charge of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status Meaning
4 LEDs light. • State of charge: 75 % to 100 %
3 LEDs light. • State of charge: 50 % to 75 %
2 LEDs light. • State of charge: 25 % to 50 %
1 LED lights. • State of charge: 10 % to 25 %
1 LED flashes. • State of charge: < 10 %
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the LEDs of the charge state indicator flash, follow the instructions
in the 'Troubleshooting' section.
3.5 Items supplied
Crimping / pressing tool, operating instructions.
Other system products approved for use with this product can be found at your local HILTI STORE or online
at: www.hilti.group
4 Technical data
NPR 032 PE-A22
Rated voltage 21.6 V
Weight in accordance with EPTA procedure 01 4.58 kg
Crimping / pressing time
≈ 7 s
Max. crimping / pressing force 32 kN
Storage temperature −20 ℃ …70 ℃
Ambient temperature for operation
−17 ℃ …60 ℃
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
Printed: 29.10.2018 | Doc-Nr: PUB / 5436899 / 000 / 01