![background image](http://html1.mh-extra.com/html/hilti/npr-019-ie-a22/npr-019-ie-a22_original-operating-instructions_2135141024.webp)
20
English
2188464
*2188464*
▶
Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a
load-bearing structure. Check that both carabiners hold securely.
Comply with the operating instructions of the
Hilti
retaining strap and those of the
Hilti
tool tether.
5.5
Inserting the crimping / pressing jaws
CAUTION
Risk of injury!
The accessory tool may be hot and/or have sharp edges.
▶
Wear protective gloves when changing the accessory tool.
▶
Never lay down a hot accessory tool on a flammable surface.
WARNING
Risk of injury!
Unintentional starting.
▶
Remove the battery before fitting, changing or removing the crimping / pressing jaws.
Never operate the product without the crimping / pressing jaws installed!
To ensure correct crimping / pressing and reliable and safe operation, use only the crimping / pressing
jaws approved by the system provider and/or machine manufacturer.
1. Remove the battery and select the appropriate crimping / pressing jaws.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
4. Pull out the locking pins.
5. Insert the crimping / pressing jaws.
6. Push the locking pins in until they engage.
7. Rotate the crimping / pressing head to the desired working position.
The crimping / pressing head can be rotated much more easily when not under pressure.
5.6
Removing the crimping / pressing jaws
WARNING
Risk of injury!
Unintentional starting.
▶
Remove the battery before fitting, changing or removing the crimping / pressing jaws.
1. Remove the battery and rotate the crimping / pressing head into the outset position.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
4. Pull out the locking pins.
5. Work the crimping jaws forward and out of the product.
6
Operation
Observe the safety instructions and warnings in this documentation and on the product.
6.1
Crimping / pressing
DANGER
Electric shock hazard!
Working in adverse outdoor conditions can cause electric shocks and/or short
circuits.
▶
Never work on electrically live lines while a thunderstorm is in progress.
▶
Call a halt to work immediately whenever weather conditions impair the insulation characteristics, vision
or movement of the workers.
Summary of Contents for NPR 019 IE-A22
