Hilti NCR 120 PC-A22, Original Operating Instructions

Page: 10 / 80

6 English 2215656
*2215656*
3 Description
3.1 Product overview 1
@ Crimping / pressing head
;
Crimping tool release buttons
=
Key ring
%
Casing
&
Servicing and fault indicator (red LED)
(
Manual piston return switch
)
Control switch
+
Battery release button
§ Battery
/
Grip (optional), possible installed position
:
Crimping / pressing die
∙
White LED to illuminate the working area
3.2 Intended use
The product described is an uninsulated, cordless, electro-hydraulic crimping / pressing tool.
It is designed for crimping / pressing connection material made of copper (Cu) or aluminum (Al).
Before use of the power tool, all live cables or other items carrying electric voltage within the area in which
the user is working must be switched off. If this is not possible, the corresponding safety precautions for
working in proximity to live cables or equipment must be implemented and observed.
• Use only
Hilti lithium­ion batteries of the B 22 series with this product.
• Use only Hilti -approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group
3.3 Possible misuse
• Do not use this hand-held product clamped in a fixed position or as a stationary device.
3.4 Coated crimping / pressing head
NCR 120C-A22
DANGER
Electricity presents a risk of fatal accident! Contact with electrically live lines can lead to severe physical
injury and/or death.
▶ The crimping tool is not insulated! If you use this crimping tool in the vicinity of electrically live lines, wear
personal protective equipment.
The crimping / pressing head of the NCR 120C­A22 has a PVC coating made up of two layers. The inner
layer of the PVC coating is red, the outer layer is black.
Before each use, inspect the black coating on the tool head for indications of damage or aging. If you
find such damage, the red coating is visible and/or the crush-hazard or electric-shock-hazard symbol
is no longer legible, do not use the crimping tool and contact
Hilti Service.
3.5 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the product are indicated by the indicator of the
Li­ion battery. The state of charge of the Li­ion battery is displayed after pressing one of the two battery
release buttons.