12
en
12. Health and safety of the operator
12.1 Noise information
Powder-actuated fastening tool
Type
DX 860-ENP
Model
Series
Caliber
6.8/18 red
Power regulation
2
Application
Fastening to 8 mm steel (390 MPa)
with X-ENP 19L15MX R
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in
conjunction with E DIN EN 15895
Noise (power) level:
L
WA, 1s
1
115 dB(A)
Emission noise-pressure level in the work station:
L
pA, 1s
2
104 dB(A)
Peak sound pressure emission level:
L
pC, peak
3
137 dB(C)
Operation and set-up conditions:
Set-up and operation of the pin driver in accordance with E DIN EN 15895-1 in the semi-anechoic test room of
Mu
̈
ller-BBM GmbH. The ambient conditions in the test room conform to DIN EN ISO 3745.
Testing procedure:
Enveloping surface method in anechoic room on reflective surface area in accordance with E DIN EN 15895, DIN
EN ISO 3745 and DIN EN ISO 11201.
NOTE: The noise emissions measured and the associated measurement uncertainty represent the upper limit for
the noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
1
± 2 dB (A)
2
± 2 dB (A)
3
± 2 dB (C)
12.2 Vibration
Total vibration in accordance with 2006/42/EC does not
exceed 2.5 m/s².
Further information about user health and safety can be
found at www.hilti.com/hse.
Printed: 10.04.2017 | Doc-Nr: PUB / 5126862 / 000 / 00
Printed: 10.04.2017 | Doc-Nr: PUB / 5126862 / 000 / 01
