Hilti DSW 2005-TS, Manual

Page: 18 / 44

14 English 2235115
*2235115*
3.6.2 Single-pulley stand (DSW-SPP)
The diamond sawing wire can be redirected
over a single-pulley stand.
3.6.3 Release pulley (DS-WSRW)
A release pulley can be used for cutting thick
walls, for example, or for long cuts. This is
a way of optimizing wire contact length and
increasing cutting speed.
3.6.4 Guard (DSW-WG)
Guards must be fitted if it cannot be ensured
that persons do not enter the danger zones
where they would be at risk from flying frag-
ments, or where there is a risk of damage to
property, while work is in progress.
4 Technical data
Dimensions (W x D x H) 860 mm x 700 mm x
2,350 mm
Drive wheel diameter
500 mm
Cutting speed 13.3 m/s … 24.1 m/s
Capacity, wire storage 5.6 m
Rail DS-R200-L or DS-R230-L
Wire diameter 8 mm … 12 mm
Recommended wire length 11.5 m
4.1 Weights of the individual components
Total weight without saw head 105.0 kg
Base plate 20.5 kg