10
English
2328430
*2328430*
▶
Always lead cables and hoses flat on the ground or floor away from the machine. This
will help to reduce the risk of tripping while working.
▶
Keep cables and hoses away from rotating parts.
▶
Make sure that the cooling water used is drained away or collected (vacuum) in a
suitably controlled manner. Water that’s allowed to flow away or spray around in an
uncontrolled manner can lead to damage or accidents. Also remember that water
could drain away into internal, hidden cavities.
▶
Don’t work from a ladder.
2.4 Safety measures at the danger areas
WARNING
A risk is presented by moving parts, by falling objects or debris that may fly off!
Falling or flying objects could cause serious injury.
▶
Make sure that the area is cordoned off and that warnings to third parties are displayed.
▶
Make sure that no one is present in the area immediately beneath the workplace while
work is in progress.
View: Vertical cut in the wall
X
Keep a safe distance of at least
1.5 m away from all moving parts.
Y
Never stand in line with the rotating
saw blade.
Z
Never stand below the working
area
A
Never stand on the other side of the
working area.
Secure the working area. Make sure that persons cannot be injured and property cannot
be damaged by falling, flying or moving parts.
Summary of Contents for DST 20-CA
