12
English
2153083
*2153083*
WARNING
Risk of injury!
Inadvertent starting of the saw is hazardous.
▶
Always press the EMERGENCY OFF button on the remote control unit before carrying
out any work on the saw.
1. Close the water supply valve and disconnect the water hose from the hose connector
on the water supply system.
2. Disconnect the supply cord from the electric supply.
3. Disconnect the control cable from the remote control unit and the saw head and close
all covers on the plugs and connectors.
4. Remove the remote control unit from the attachment points on the handlebar.
5. Disconnect the water supply hose from the hose connector on the saw head.
6. Remove the blade guard (see operating instructions for the electric wall saw).
CAUTION
Risk of injury!
The saw blade can get hot.
▶
Wear protective gloves.
7. Remove the saw blade (see operating instructions for the electric wall saw).
8. Bring the blade guard holder into the 6 o'clock position.
9. Hold the saw head securely by both levers. Release the saw head clamping levers
and bring them into the “released” position (see section on mounting the saw head in
the operating instructions for the electric wall saw).
10.Remove the saw head from the floor saw trolley by lifting it upwards.
5.5 Mounting the cutting line indicator on the opposite side
If the saw head is mounted so that the saw blade is repositioned on the other side
of the floor saw trolley (relative to the previous cut made), the cutting line indicator
must also be repositioned, i.e. mounted on the opposite side.
1. Pull the securing pin out of the hollow bolt.
2. Pull the pointer out.
3. Insert the pointer in the hollow bolt on the opposite side and position the pointer so
that the holes in the pointer and in the hollow bolt are in alignment.
4. Insert the securing pin.
Printed: 07.05.2019 | Doc-Nr: PUB / 5492449 / 000 / 00
Summary of Contents for DSF 1030-TS
