![background image](http://html1.mh-extra.com/html/hilti/dd-130/dd-130_operating-instructions-manual_2135208018.webp)
27
10. Disposal
Most of the materials from which Hilti pow-
er tools are manufactured can be recycled.
The materials must be correctly separated
before they can be recycled. In many coun-
tries, Hilti has already made arrangements for taking
back your old electric tools for recycling. Please ask
your Hilti customer service department or Hilti sales
representative for further information.
Disposal of drilling slurry
With regard to environmental aspects, allowing drilling
slurry to flow directly into rivers, lakes or the sewer-
age system without suitable pre-treatment is prob-
lematical. Ask the local authorities for information about
applicable regulations.
We recommend the following pre-treatment:
Collect the drilling slurry (e.g. use a wet-type indus-
trial vacuum cleaner).
Allow the slurry to settle and dispose of the solid mate-
rial at a construction waste disposal site (the addition
of a flocculent may accelerate the settling process).
Water from the drilling slurry (alkaline, ph value > 7)
should be neutralized by adding an acidic neutralizing
agent or large quantity of water before it is allowed to
flow into the sewerage system.
Only for EU countries
Disposal of electric tools together with household waste
is not permissible!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric tools
that have reached the end of their life must be collected
separately and returned to an environmentally compat-
ible recycling facility.
11. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.
12. EC declaration of conformity
Designation:
Diamond drilling machine
Type:
DD130
Year of design:
2001
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
98/37/EC, 89/336/EEC, EN 61 029-1, EN 55 014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-11
Hilti Corporation
Peter Cavada
Ivo Celi
Head of BU
Head of BU
Quality and Process Management
Diamond
BA Electric Tools & Accessories
05/2007
05/2007