6
English
1. Remove the clamping flange for the arbor.
2. Screw the adapter on to the arbor and tighten it securely.
3. Insert a diamond cutting disc, observing the specified direction of rotation.
4. Fit the spacer rings for the desired width between slits.
5. Insert a diamond cutting disc, observing the specified direction of rotation.
6. Screw on the clamping nut and tighten it securely with the pin wrench.
7. Close the hood.
5.4
Fitting a diamond cutting disc
1. Fit the clamping flange on to the arbor.
2. Place the first diamond cutting disc on the clamping flange.
Observe the specified direction of rotation.
3. Screw on the
Kwick-Lock
nut until it is seated against the cutting disc.
4. Close the hood.
5.5
Setting depth
1. Release the locking screw.
2. Push the back panel to the desired position.
◁
The scale shows the group.
3. Firmly tighten the locking screw.
5.6
Plunge function
1. Position the carriage plate on the work.
2. Switch on the tool.
Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02