![background image](http://html.mh-extra.com/html/hilti/c-4-36-mc4/c-4-36-mc4_operating-instructions-manual_2134899008.webp)
4
English
▶
Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes,
jewellery or long hair can be caught in moving parts.
▶
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
Power tool use and care
▶
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
▶
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
▶
Disconnect the plug from the power source from the power tool
before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
▶
Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
▶
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power
tools.
▶
Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
▶
Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
2.2 Battery charger use and care
▶
To avoid injury, use the charger only to charge
Hilti
Li-ion batteries
approved for use with this charger.
▶
The location at which the charger is used should be clean and cool but
protected from frost.
▶
The charger must be able to emit heat while in operation. The air vents
must therefore remain unobstructed. Accordingly, remove the charger
from the toolbox. Do not operate the charger inside a closed container.
▶
Maintain the appliance carefully. Check to ensure that no parts are
broken or damaged in such a way that the appliance may no longer
Printed: 20.07.2017 | Doc-Nr: PUB / 5253186 / 000 / 05
Summary of Contents for C 4/36 MC4
