Hilti AIC 1000, Original Operating Instructions

Page: 16 / 280

12 English 2297300
*2297300*
▶
Observe the accident prevention regulations applicable in your country.
▶
If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of a vacuum cleaner can reduce dust-related hazards.
▶
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
▶
Children should be supervised to ensure that they do not play with the appliance.
▶
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
2.5 Additional safety instructions
▶
Do not use the product if the supply cord and/or the plug is damaged. Make sure that supply cord and
extension cord are not exposed to moisture and/or damp. Do not touch the supply cord if it is damaged
while work is in progress.
▶
Before starting, check all filters and seals and replace damaged filters. Operate the product only with
approved filters (pre-filters and main filters) installed.
▶
Do not allow water to collect in the hollow of the grip. Clean the drain hole at regular intervals.
▶
Whenever the room is occupied, always operate the product at the highest power level.
▶
Make sure that the main-filter frame is securely installed and correctly seated.
▶
Do not use the air filter in the vicinity of flammable and explosive gases.
▶
Wear protective gloves for working with hot materials and for carrying out maintenance tasks on the
product.
▶
Make sure that the air cleaner is so steady that there is no risk of it tipping over.
▶
When the product starts up, it produces a strong current of discharged air. This can swirl up dust in the
product's immediate vicinity.
▶
Always switch the product off at the main switch! The start-up capacitor can carry an electrical charge
even after the plug has been disconnected from the power outlet.
▶
Do not use the product to filter hot or incandescent fragments or particles. Make sure that the temperature
of the inducted contaminated air does not exceed 60 °C.
▶
Do not permit the product to become overloaded or blocked because of an overfilled filter. Further
operation is no longer possible as soon as the indicator lamp lights up.
▶
To reduce the risk of injury use only genuine Hilti accessories and spare parts or those of equivalent
quality.
▶
Before beginning cleaning and maintenance work, switch the product off and unplug it from the power
outlet. Before you open the filter cover, wait until the turbine has come to a complete stop.
▶
Do not transport the product by crane or with hoists.
▶
Do not stand on the product (do not use it as a substitute for a ladder).
▶
Connect the product only to a properly earthed/grounded power source.
▶
Before you unplug the supply cord of a power tool from the product's electric tool power outlet, always
first disconnect the product from the main electricity supply.
▶
Store the product and its accessories in dry rooms. Keep it out of reach of children.