Hilti AG 450-7, Original Operating Instructions

Page: 14 / 62

8 English 2075440
*2075440*
The maximum grinding disc thickness is 1/4" and the maximum cutting disc thickness is 1/8".
WARNING! When cutting or slitting with cutting discs, always use the standard guard with additional
cover plate.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slitting AC­D Metal
Diamond cutting disc Cutting, slitting DC­D, DC­TP mineral
Abrasive grinding disc Rough grinding AG­D, AF­D, AN­D Metal
Wire brushes Wire brushes 3CS, 4CS, 3SS, 4SS Metal
Suitability of discs for the equipment used
Item Equipment AC­D AG-D AF-D AN-D DC­D 3CS/3SS/
4CS/4SS
AG-D
type 27
A Guard X X X X X X —
B Front cover (in combination
with A)
X — — — X — —
C Side handle X X X X X X X
D Clamping nut (not for use
with accessories with inte-
grated thread)
X X X X X — —
E Clamping flange (not for
use with accessories with
integrated thread)
X X X X X — —
F Type 27 guard — — — — X — X
5 Technical data
If the product is powered by a generator or transformer, the generator or transformer’s power output must
be at least twice the rated input power shown on the rating plate of the product. The operating voltage of
the transformer or generator must always be 5 % and -15 % of the rated voltage of the product.
The information given applies for a rated voltage of 120 V. Actual figures can vary for country-specific
versions and if the voltage supply differs. For rated voltage, frequency, input power and rated current, refer
to the rating plate.
AG 450-7 (S/D)
Rated current input 7 A
Rated speed 11,500 /min
Rated frequency 60 Hz
Weight 4.4 lb
(2.0 kg)
Maximum disc diameter 4.5 in
Drive spindle thread
5/8"-11
Thread length 3 3/8"
6 Before use
CAUTION
Risk of injury. The accessory tool may be hot or have sharp edges.
▶
Wear protective gloves when fitting, removing or adjusting the accessory tool or other parts and when
troubleshooting.
6.1 Fitting the side handle
▶
Screw the side handle into one of the threaded bushings provided.
Printed: 23.07.2018 | Doc-Nr: PUB / 5169271 / 000 / 03