10
en
8. Troubleshooting
Fault
Possible cause
Remedy
The tool can be activated Weak battery
Fit a new battery.
only when the key is held
close to it.
Activation possible only
Weak or dead battery
Fit a new battery.
in backup mode
Several activation keys are in the
Remove all activation keys except one from
vicinity of the electric tool at the same
the vicinity of the electric tool and repeat the
time
activation procedure.
Work group mode cannot The tool was already activated before
1. Unplug the supply cord from the mains
be set
attempting to set it to work group
socket.
mode.
2. Ensure that no activation key is in the
vicinity of the electric tool (theft protec-
tion indicator must be blinking).
3. Repeat the procedure for setting work
group mode.
Work group mode cannot The tool was already activated before
1. Unplug the supply cord from the mains
be cancelled
attempting to cancel work group
socket.
mode.
2. Ensure that no activation key is in the
vicinity of the electric tool (theft protec-
tion indicator must be blinking).
3. Repeat the procedure for canceling work
group mode.
10. Warranty
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid as long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
operating instructions, all warranty claims are made within
12 months (unless other mandatory national regulations
prescribe a longer minimum period) from the date of the
sale (invoice date), and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or replace-
ment of defective parts only. Parts requiring repair or
replacement as a result of normal wear and tear are not
covered by this warranty.
Hilti is not obligated for direct, indirect, incidental or
consequential damages, losses or expenses in con-
9. Disposal
Dispose of batteries in accordance with the applicable
national or local regulations.
nection with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
Send the tool and/or related parts immediately upon dis-
covery of a defect to the local Hilti marketing organisa-
tion for repair or replacement.
This constitutes Hilti’s entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
Summary of Contents for 377271
Page 2: ...1 햳 햲 ...
Page 3: ...2 1 2 3 4 3 ...
