2.1 Configuration
2.1.1 Selection of Serial Interface Type
The hardware of the converter has jumper J2, to switch between the different
types of serial interfaces. This jumper is accessable if you open the side plate on
the side where there are both serial interfaces. This is be done by removing four
screws. The following picture will show the position of the jumper seeing from
the side of the converter. With the help of the table you can chose the right type
of interface.
selection
jumper J2
interface
open
RS232
3-4
RS485
1-2, 3-4
RS422
Selection of serial interface type
connector male
connector female
1
4 3 2
jumper row
Side viewing of PKV 30-DPS with jumper row
serial interface
PROFIBUS interface
1
4 3 2
General device description
6
Copyright * Hilscher Gesellschaft für Systemautomation mbH * Hotline/Support: +49(0)6190/9907-99 * De:P30DPS#5E
