2.2 Connecting the supply voltage (X1)
The Protocol Converter requires a supply voltage of 24 Volt. The maximum po-
wer consumption is given in the chapter on “Technical Data”. A three-phase
rectified supply or a simple rectified switching with charge capacitor is sufficient.
The supply voltage must be led to ground. It is connected by means of a plug-in
screwed clamp. Use is made of a 3-pole COMBICON plug from the PHOENIX
company (MSTB 2,5/3-ST-5,08).
Connection
Symbol
Signal
1
+24V
+24V supply voltage
2
0V
Reference potential
3
PE
Equipment grounding conductor
Connector pin assignment of the operating voltage connection X1
General Device Description
7
Copyright * Hilscher Gesellschaft für Systemautomation mbH * Hotline/Support: +49(0)6190/9907-99 * De:P30COS#3E
