hilscher NXHX 90-MC, Device Description

Page: 21 / 83

Descriptions 21/83
2.6.9 J1 - Connector for power and motor supply
The pressure clamp 2Pin. RM5.0 J1 is used to connect the power and
motor voltage supply.
The range is +12V to + 43V DC (36V+20%)
For operating the NXHX 90-MC board, the nominal input voltage range is
+12V to 36V DC for either 12V, 24V or 36V motor supply voltages with 24V
the most popular for industrial applications.
For identifying the connector on the board, see position (19) in section
Positions of interfaces and operating elements [
}
page 8].
J1 Number Description
(1) VM +12V to + 43V DC (36V+20%)
(2) GND Ground
Table 18: Pin assignment power and motor supply pressure clamp J1
Note:
Ensure connecting DC voltages only. No rectifier and polarity
protection circuit.
For high power operation, cooling of the MOSFETS may be
necessary.
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public © Hilscher 2021