hilscher NXHX 4000-JTAG+, Device Description

Page: 22 / 70

Descriptions and drawings 22/70
2.4.7 X1300 - Host interface connector
Host interface (HIF) connector X1300 . For identifying the connector on the
board, see position (14) in section Positions of interfaces and operating
elements [
}
page 12].
You can mount (plug-on) the NXHX-FTDI board on this connector.
Pin Signal Pin Signal
1
+3V3
35 Not connected
2
GND
36 Not connected
3 Not connected 37 Not connected
4 Not connected 38 Not connected
5
GND
39 Not connected
6 Not connected 40 Not connected
7 Not connected 41 Not connected
8 Not connected 42 Not connected
9 Not connected 43 Not connected
10 Not connected 44 Not connected
11 Not connected 45 Not connected
12 Not connected 46 Not connected
13
GND
47 Not connected
14 Not connected 48 Not connected
15 Not connected 49 Not connected
16 Not connected 50
GND
17 Not connected 51
SPM_SIO3
18 Not connected 52
SPM_SIO2
19 Not connected 53
SPM_SIRQ#
20
GND
54
SPM_DIRQ#
21 Not connected 55
SPM_CLK
22 Not connected 56
SPM_CS#
23 Not connected 57
SPM_MOSI
24 Not connected 58
SPM_MISO
25
GND
59 Not connected
26 Not connected 60 Not connected
27 Not connected 61 Not connected
28 Not connected 62 Not connected
29 Not connected 63 Not connected
30 Not connected 64 Not connected
31 Not connected 65 Not connected
32 Not connected 66 Not connected
33
GND
67
+3V3
34 Not connected 68 Not connected
Table 17: Pin assignment of X1300 HIF connector
NXHX 4000-JTAG+ | Device description
DOC170703HW02EN | Revision 2 | English | 2018-10 | Released | Public © Hilscher 2018