Technical Data Slot PLC NPLC-C100-xx
29/36
Slot PLC NPLC-C100 | Hardware Installation
DOC120112UM02EN | Revision 2 | English | 2014-01 | Released | Public
© Hilscher, 2009-2014
9 Technical Data Slot PLC NPLC-C100-xx
Number of Slot PLCs
Max. 2 slot PLC in one PC
Table 15: Technical Data Slot PLC
Item
NPLC-C100-DP, NPLC-C100-CO, NPLC-C100-DN
System Interface
PCI V2.3, 33 MHz
Dual-Port Memory Size
64 KByte
Protocols
NPLC-C100-DP, PROFIBUS DP Master
NPLC-C100-CO, CANopen Master
NPLC-C100-DN, DeviceNet Master
Processor
netX 100
Memory
8 MByte SDRAM,
128 KByte SRAM (Battery buffering),
4 MByte serial Flash
LED
SYS, APL, COM0, COM1
Operating Elements
RUN/STOP switch
Battery Type
CR 2032
Memory Card
microSD
PROFIBUS Interface
NPLC-C100-DP
D-Sub female connector, 9 pin;
optically isolated RS-485 interface for PROFIBUS DP
NPLC-C100-CO
D-Sub male connector, 9 pin for CANopen
NPLC-C100-DN
COMBICON, 5 pin for DeviceNet
Connection for
external Power Supply
COMBICON 2-pin
Diagnostic Interface
Mini USB
Power Supply
Rev 3:
5 V (4,5 … 5,5 V), 500 mA
Rev 4:
PCI-Bus
3,3 V (3,1 … 3,5 V), 700 mA or
5 V (4,5 … 5,5 V), 500 mA or
External
:
18 … 30 VDC
Current consumption at 18 V approx. 120 mA,
at 30 V approx. 80 mA.
The current is taken from the highest supply voltage.
External Power Supply
18 … 30 VDC
Dimensions (L x W x D)
120 x 90 x 20 mm
(130 x 121 x 22 mm over all)
Operating Temperatur
0 … 55 °C
Table 16: Technical Data NPLC-C100-xx
