hilscher netX 90, Production Manual

Page: 3 / 70

Introduction 3/70
1 Introduction
1.1 About this document
1.1.1 Description of the contents
This production guide describes the software architecture of the netX 90
SoC and explains how to program necessary software components into
your device during end-of-line production.
1.1.2 List of revisions
Index Date Author Revision
1 2019-04-04 MKE Preliminary version created
2 2019-04-26 MKE Section Files [
}
page 20] revised
Section Flash layout [ } page 11] revised
Section Programming interface
options [ } page 47] revised
Section How to use the Command line
flasher [
}
page 57] revised
3 2019-07-12 MKE Document revised and released
Table 1: List of revisions
1.2 Further relevant documentation
Besides this production guide, the following documents are also relevant to
the OEM manufacturer of netX 90-based devices:
Title Contents Document ID
Getting started: netX Studio CDT – netX 90
development Getting started guide for netX 90 SoC
development with netX Studio CDT (for software
developers) DOC170504GSxxEN
netX 90 – Technical data reference guide Describes netX 90 chip functions DOC160609TRGxxEN
netX 90 – Design-In Guide Describes the standard circuitry around the netX
interfaces (for hardware developers) DOC180501DGxxEN
Table 2: Additional documentation
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public © Hilscher 2019