Hardware Installation and Uninstalling
60/154
PC Cards cifX PC/104 | Installation, Operation and Hardware Description
DOC120206UM42EN | Revision 42 | English | 2014-12 | Released | Public
© Hilscher, 2008-2014
Connect AIFX Assembly Interface
Only for the basic cards CIFX 104-RE\F and CIFX 104-RE-R\F or the basic
cards CIFX 104-FB\F and CIFX 104-FB-R\F:
Note:
First connect the AIFX-RE, AIFX-DP, AIFX-CO, AIFX-DN or AIFX-CC assembly
interface to each basic card PC/104, before plugging another PC/104 module. Just so
you can check exactly whether the AIFX is properly connected to the basic card.
Important!
Operating the PC cards CIFX 104-XX\F or CIFX 104-XX-R\F requires proper
connection of the Ethernet (AIFX-RE), PROFIBUS (AIFX-DP), CANopen (AIFX-CO),
DeviceNet (AIFX-DN) or CC-Link (AIFX-CC) assembly interface to the basic card!
6. Connect the Ethernet assembly interface (AIFX-RE) to the basic card.
Connect the
cable connector Ethernet X1
on the AIFX-RE with the
cable.
Connect the
cable connector Ethernet X4
(or X304) on the basic card
CIFX 104-RE\F or CIFX 104-RE-R\F with the cable.
Figure 32: Connecting the Ethernet Assembly Interface (AIFX-RE) to the Basic Card CIFX
104-RE\F (Example)
7. Or connect the PROFIBUS (AIFX-DP), CANopen (AIFX-CO),
DeviceNet (AIFX-DN) or CC-Link (AIFX-CC) assembly interface to the
basic card.
Connect the
cable connector fieldbus X1
on the assembly interface
with the cable.
Connect the
cable connector fieldbus X4
(or X304) on the PC card
CIFX 104-FB\F or CIFX 104-FB-R\F Feldbus with the cable.
Example basic card
CIFX 104C-CO-R\
F,
Cable Connector Fieldbus X4
AIFX-CO
Assembly
Interface with
Cable
Connector Fieldbus X1
Important!
The contacts on the connection
cable must face up!
Figure 33: Connecting the CANopen Assembly Interface (AIFX-CO) to the Basic Card 104-
FB-R\F (Example)
Install the AIFX-RE, AIFX-DP, AIFX-CO, AIFX-DN or AIFX-CC
assembly interface at the front plate of the PC cabinet.
