Safety
18/145
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM36EN | Revision 36 | English | 2012-10 | Released | Public
© Hilscher, 2008-2012
2 Safety
2.1 General
Note
The documentation in the form of a user manual, an operating instruction
manual or other manual types, as well as the accompanying texts have
been created for the use of the products by educated personnel. When
using the products, all Safety Messages, Safety Messages, Property
Damage Messages and all valid legal regulations have to be obeyed.
Technical knowledge is presumed. The user has to assure that all legal
regulations are obeyed.
2.2 Intended
Use
The PC Cards cifX described in this user manual are PC cards for the Real-
Time Ethernet or fieldbus communication. Depending from the loaded
firmware, the Real-Time Ethernet or fieldbus systems listed in the following
table can be realized using the respective PC Card cifX.
PC Cards cifX
Real-Time Ethernet System
PC Cards cifX
Fieldbus System
EtherCAT Master,
EtherCAT Slave
CIFX 50-DP
CIFX 50E-DP,
CIFX 70E-DP
PROFIBUS DP Master,
PROFIBUS DP Slave,
PROFIBUS MPI Device
EtherNet/IP Scanner (Master),
EtherNet/IP Scanner (Slave)
CIFX
50-2DP
PROFIBUS DP Master,
PROFIBUS DP Slave
Open-Modbus/TCP
CIFX 50-CO
CIFX 50E-CO,
CIFX 70E-CO
CANopen Master,
CANopen Slave
Powerlink Controlled Node/Slave
CIFX 50-DN
CIFX 50E-DN,
CIFX 70E-DN
DeviceNet Master,
DeviceNet Slave
PROFINET IO-RT Controller (Master),
PROFINET IO-RT Device (Slave)
CIFX 50-2ASM
AS-Interface Master
sercos Master,
sercos Slave
CIFX 50-CC
CIFX 50E-CC
CC-Link Slave
CIFX 50-RE,
CIFX 50E-RE,
CIFX 70E-RE,
CIFX 100EH-
RE\CUBE
VARAN Client (Slave)
CIFX 50-CP
CIFX 50E-CP
CompoNet Slave
Table 7: PC Cards cifX and the Real-Time Ethernet or Fieldbus Systems realized thereby
2.3 Personnel
Qualification
The PC Card cifX must only be installed, configured and removed by
qualified personnel. Job-specific technical skills for people professionally
working with electricity must be present concerning the following topics:
•
Safety and health at work
•
Mounting and connecting of electrical equipment
•
Measurement and Analysis of electrical functions and systems
•
Evaluation of the safety of electrical systems and equipment
•
Installing and Configuring IT systems
