For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5.
Route the cables through the cable hole, or the side
opening.
6.
Connect the corresponding cables, such as power
cable and video cable.
7.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 355°]
Tilt Position
[0° to 75°]
Rotation Position
[0° to 355°]
Figure 2-11
3-Axis Adjustment
8.
Fit the black liner back to the camera and tighten
the screws on the bubble of the dome camera to
finish the installation.
