4
*Approved fall protection must be utilized while installing bases and guardrails where fall hazards exist.
Component Identification
A1
HLM-
GR10G
Rail Panel
–
10 ft:
1 ⅝” O.D. x
Galvanized 13 gage
tube with 11 gauge
toe board
A2
HLM-GR5G Rail Panel
–
5 ft:
1 ⅝” O.D. x
Galvanized 13 gage
tube with 11 gauge
toe board
B1
HLM-
GR10NTG
Rail Panel
–
10 ft:
1 ⅝” O.D. x
Galvanized 13 gage
tube
B2
HLM-
GR5NTG
Rail Panel
–
5 ft:
1 ⅝” O.D. x
Galvanized 13 gage
tube
C
HLM-
GR9NTG
Rail Panel
–
5.5 ft
–
9ft:
(Adjustable)
1 ⅝” O.D. x
Galvanized 13 gage
tube
Warning:
It is recommended that a competent person approve and oversee the installation of this
system.
The Hilmerson Safety Rail System™ is an engineered system. Incorrect installation,
unapproved use of other manufacturer
s’
components, or the failure to follow these instructions may
put workers at risk by weakening the design of the system, causing a system failure, and potentially
leading to serious injury or death.
Tools Needed for Installation:
Drill and ½ inch concrete drill bit, ¾ inch socket
Compatible with Most Construction Debris Netting.
Call for specific wind load capacities.
C
A2
A1
B2
B1
