Hillyard TRIDENT WD21V, Use And Maintenance Manual

Page: 17 / 120

17
IT
EN
7.Use a suitable tool to fix the squeegee support (3) to the collection tank with the screws (5) and wa -
shers (4).
8.Take hold of the front squeegee unit (6).
9.Insert the right-hand pin (7) of the squeegee in the right-hand slot (8) of the squeegee connection.
10.Repeat the same operation for the left pin.
11.Then tighten the handwheels (9) to lock the squeegee in place.
12.Finally, insert the vacuum hose (10) of the squeegee into the relative joint (11) of the vacuum nozzle.
13.Press the button (12) on the vacuum nozzle.
14.Insert the vacuum hose (10) in the hole (13) on the vacuum nozzle.
ATTENTION:
this operation can be simplified
by first loosening the handwheel (9) on the pin.
ATTENTION: remember to spread a bit of thread-locking
fluid (medium resistance) on the threaded part of the
screws before tightening them on the collection tank.