13
Assembly
Step 9 – Fit arms to mount brackets
9.1
Re attach plastic inserts into wall brackets.
9.2
Attach the arms to the top of the mount brackets as shown using the fasteners and
5mm hex key provided. Refer to
Fig. 15
and
Fig. 16
. Replace arm end cap if it has
come loose in transit. Refer to
Fig. 17
for correct orientation.
9.3
Attach the struts to the bottom of the mount brackets as shown using the fasteners
and 5mm hex key provided. Refer to
Fig. 15
and
Fig. 16
.
Do not over tighten the fasteners as the arms and struts must be free
to pivot.
In this manual left and right side is referenced as if you are looking at your
clothesline ie. at the wall/post kit you are assembling to.
Repeat for other arm.
Fig. 15
Fig. 16
Supa Fold Duo
Supa Fold Mono
Strut
Arm
Mount bracket
Small fastener
Large fastener
5mm hex key
Mount bracket
Strut
Strut
Small fastener
Large fastener
Inner arm
Outer arm
5mm hex key
* RH arm shown
for reference
* RH arm shown
for reference
Note:
Arms to fit into mount bracket long
arm on the outer, short arm on the inner.
Fig. 17
Summary of Contents for Supa Fold Duo
Page 22: ...22 Notes ...
Page 23: ...23 Notes ...
Page 24: ...Hills Holdings Limited A B N 35 007 573 417 Issue March 2011 PD2991c ...
