background image

8

Warranty

5.

  This warranty is in addition to any  

non-excludable legal rights or remedies 
conferred on the consumer under any 
applicable Act and any similar laws. To the 
extent permitted by law, Hills’ liability for 
any non-excludable condition or warranty 
is limited to rectifying any defect at its 
option, as set out in paragraph 4(b).

6.  

Subject to the requirements of any 
applicable Act or legislation and to 
the extent permitted by law, no liability 
(whether expressed or implied) of any 
nature whatsoever, is accepted by Hills 
for any consequential loss, damage or 
injury arising as a result of any fault in the 
Products.

7.  

This warranty does not extend to damage 
to Products which occurs during transit or 
transportation, or which is caused by any 
abuse, accident or improper installation, 
connection, use, adjustment or repair or 
use of goods otherwise than in accordance 
with instructions issued by Hills.

8.  

The warranty on Products is waived if any 
addition or attachment to the Products do 
not have Hills’ specific approval or are not 
sold as Hills products. The Products are 
designed to perform specific tasks under 
established test loads and unauthorised 
attachments may produce stresses for 
which the design is not appropriate.

9.

  The following applies to consumers who 

purchased a relevant Product in Australia:

   Our goods come with guarantees that 

cannot be excluded under the Australian 
Consumer Law. You are entitled to a 
replacement or refund for a major failure 
and compensation for any other reasonably 
foreseeable loss or damage. You are 
also entitled to have the goods repaired 
or replaced if the goods fail to be of 
acceptable quality and the failure does not 
amount to a major failure.

Hills contacts

We are committed to providing you with 
complete customer satisfaction. If you have 
any questions or comments about our 
products or services please contact your 
nearest Customer Service Centre during their 
local business hours:

Australia 

1300 300 564 
[email protected]

New Zealand 

09 262 3052 
[email protected]

Rest of the World 

Refer to Hills website 
hillshome.com.au/contact

Hills websites
hillshome.com.au 

Hills Branded Products

hillshome.com.au/contact 

Hills Consumer Advice

hills.com.au 

Hills Limited

Hills Limited 

ABN 35 007 573 417

Issue January 2014 
PG1120c

Summary of Contents for Extra Large Rotating Caddy Ironing Board









Reviews: