Annex I - Getting started
80028681_002_C – 774259 – 2021-09-01
87
8
Annex I - Getting started
8.1
Video Routing
To send a video signal to a monitor, drag the relevant image from
the list of available sources and drop it in one of the enabled
monitors. The Preview of the video signal sent will be displayed in
the relevant Monitor icon and updated periodically.
To remove the signal from a monitor, select it from the Monitor List
and press
.
8.2
Multiview
In the Multiview section, it is possible to create a composition of 2
or 4 images among those available in the Source List.
Select the desired layout from PiP, PaP, PoP and Quadview. Then
proceed to populating this layout by individually dragging the
images of the sources and releasing them in the relevant boxes.
To remove an image from a frame, press
which will appear at
the top right of the frame once selected. Once the composition of
the mosaic is complete, return to the Video Routing section by
pressing the relevant blue icon.
8.3
PTZ camera control
Press
in the RoomCam Preview to open the Live Preview. The
camera control buttons will appear. The system allows you to
change the position and zoom level of the camera.
8.4
Recording
In order to record a video or photo, it is necessary to select / insert
a patient in the appropriate section.
