Hillphoenix OB-SC R-290 PRODUCE Installation & Operation Manual Download Page 3

Page: 3 / 32

Important

D A N G E R

▲

Indicates an immediate threat of death or seri-
ous injury if all instructions are not followed
carefully.

t Hillphoenix

, the safety of our customers and employees, as well as the ongo-

ing performance of our products, are top priorities. To that end, we include impor-

tant warning messages in all Hillphoenix installation and operations handbooks,

accompanied by an alert symbol paired with the word "DANGER", "WARNING", or

"CAUTION".

All warning messages will inform you of the potential hazard; how to reduce the

risk of case damage, personal injury or death; and what may happen if the in-

structions are not properly followed.

This manual must be stored near the display case where it can be easily consult-

ed. If this manual does not provide the information you require please contact

Hillphoenix for more information.

W A R N I N G

Indicates a potential threat of death or serious
injury if all instructions are not followed care-
fully.

▲

C A U T I O N

Indicates that failure to properly follow instruc-
tions may result in case damage.

▲

iii

Summary of Contents for OB-SC R-290 PRODUCE

































Search results

Summary of Contents for OB-SC R-290 PRODUCE

Reviews:

Related manuals for OB-SC R-290 PRODUCE

Brands by name

Popular brands

Hillphoenix OB-SC R-290 PRODUCE, Installation & Operation Manual

Search results

Summary of Contents for OB-SC R-290 PRODUCE

Reviews:

Related manuals for OB-SC R-290 PRODUCE

Brands by name

Popular brands