Have you thoroughly examined the case for shipping damage? (see pg. 8)
Have you checked to ensure the case is horizontally level? (see pg. 9)
Have you checked all exposed refrigeration lines to ensure that they are not
kinked, dented or rubbing together and have installed the compressor com
partment access panel? (see pg. 11)
Have you checked and verifi ed the voltage of the receptacle you are going to
use for power and the voltage required for the case match? (see pg. 11)
Have you verified the display case switch is in the OFF position prior to plug
ging in to the main power source? (see pg. 11)
Have you reviewed safety warning labels and verified all are present and in
good condition?
After powering-up the case, be certain that all of the steps listed below have
been completed to ensure proper case functionality, safety and compliance with
warranty terms.
1.
Check case temperature and adjust controller as needed. All display case
connections comply with the information/instructions?
2.
Store the installation manual in the vicinity of the display case itself to
where it can be accessed and consulted by all members of staff involved in
the use of the refrigerator display case.
3. Before placing food in the display case, allow the case to operate for approx
imately two (2) hours and ensure the case is at the proper temp before
loading.
Before powering-up the case, be certain that all of the steps listed below have
been completed to ensure proper case functionality, safety and compliance with
warranty terms.
PRE-POWER CHECKLIST
13
