48
Hillphoenix Refrigeration Systems
CO
2
One Condensing Unit
Section 5: Maint
enance
• Clearly post appropriate warning signs to inform personnel of any maintenance or dismantling work in
progress to prevent any undesired operation.
• Only authorized personnel may access the work area while any maintenance or dismantling is in progress.
•
Disassemble only the parts of the equipment required to perform the specific maintenance functions. Before
returning the equipment to the operators, verify its integrity and functionality.
• Operate, to the extent possible, on the equipment and pipes only after evacuating them. Before proceeding
with restart, ensure thorough cleaning of the system.
• Do not,
for any reason, use gasoline, solvents, corrosive products, or flammable fluids to clean parts. Use
neutral and approved non-flammable, non-toxic commercial detergents.
•
Do not make alterations to the equipment that could compromise safety without first obtaining written
authorization from Hillphoenix.
• All environmental impact materials removed as a result of maintenance must be disposed of in accordance
with current regulations.
ATTENTION: For the disposal of materials with high environmental impact, if necessary, use
specialist waste collection facilities.
Checking the availability of necessary material
60 days prior to the date of scheduled maintenance, perform a detailed examination of the necessary material:
1. Check if the material is in stock.
2. If necessary, request any missing parts from Hillphoenix or the component manufacturer at least
30 days
in advance.
Maintenance and Cleaning
DANGER: Hillphoenix cannot be held in any way liable for any damage or injury caused to property or
persons due to incorrect or incomplete maintenance.
DANGER: Before carrying out any scheduled ordinary maintenance, ensure that the equipment has
been disconnected from the mains; wait for the hot surfaces to cool.
ATTENTION: In the event the equipment parts require replacement, only use original spare parts.
ATTENTION: Any brazing work conducted on the system must be carried out by qualified personnel.
Frequency
ATTENTION: On completion of maintenance procedures, replace all previously removed guards.
Summary of Contents for CO2One
Page 1: ...CO2 One CO2 Condensing Unit Manual DECEMBER 2021 ...
Page 8: ...VII ...
