44
5
www.liko.com
Liko Ultra LiftPants • 7EN160181-03
Definitions
The initial position when using the Liko
Ultra LiftPants are the sitting position.
The patient leans to the side so that the
LiftPants can be slid into place under the
buttocks. Place the LiftPants as far under
the patient as possible with the product
label facing out from the back. Make sure
that the LiftPants are centered and in a
good position with as much pant material
in back as in front. Adjust as needed.
Applying the LiftPants
Pull the front section of the
LiftPants up between the
legs so that the hip straps
are accessible from the front.
Feed the front suspension
straps through the loop straps
using the appropriate loop
(see page 6, Adjusting the
Loop Straps).
Alternative application of the Liko Ultra LiftPants
: The patient can be lifted in a normal sling and then lowered
onto the LiftPants placed on a chair or at the edge of the bed. The sling used can be e.g. the Liko UltraSling Mod. 06,
Liko Original HighBack Sling Mod. 20 or Liko Soft Original HighBack Sling Mod. 26. This application makes it easier
if for some reason the patient cannot lean to the side, or if there is no room to apply the LiftPants from the side.
1. Rear suspension straps
2. Product label
3. Serial number
4. Label: Periodic Inspection
5. Label: Individual marking (Belongs to)
6. Size marking (only for size XXL)
7. Loop straps
8. Rear part
9. Upper hip strap
10. Lower hip strap
11. Front part
12. Front suspension strap
1
2 3
6
7
8
9
10
11
12
4 5
