Service Manual Multirall™
overhead lift
• 3EN250401 Rev. 18
10
www.hillrom.com
4.0 Spare Parts Assembly Information
Assembly Instructions to Liko™ spare parts are attached with the products.
The assembly instructions are also available in Agile and on the Partner Web.
Document number to spare parts assembly instructions can be found in the spare parts list.
Liko technical documentation can be found on the Partnerweb:
https://partner.liko.com
“My information” - “Documents”
If you don’t have access, send a mail for registration to: [email protected]
NOTE
- Always make sure the spare part is mounted according to the assembly instruction.
- Mandatory: Check all functions related to the changed spare part according to the assembly instruction.
-
Repairs and maintenance may only be performed by personnel authorized by Hill-Rom
and using original Liko™ spare parts.
Key pad hand control 2-buttons
Assembly Instruction
Product No. 21090061
3EN650261 Rev. 3
ENGLISH
Tools required:
Contains:
Qty:
Key pad hand control 2-buttons 1
Fits:
Prod No.
Up to S/N:
HandControl LR 2 buttons
3126031
231 002 414
Handcontrol LR
with extralong cable
3126033
233 000 133
HandControl LR S, ES, 2 buttons 3126034
234 020 350
Handkontroll MR
3136001 201 002 904
(Fits only to hand controls up to these S/N. They are without Rev. No.)
www.hill-rom.com
l
www.liko.com
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom and using original Liko™ spare parts.
© Cop
yrigh
t Lik
o R&D AB 2016
Press the plug
Ensure that the cable
gland is located in the
intended track
Remove the tape protection
Remove the old Key pad by
carefully using a sharp tool.
Document Number
INF
ORMA
TION
