User Manual: ZPR4620
6+2 Channel Rack Zoning Mixer
V2.00 (04-2013) © Hill Audio
4
vibration and where a fixed mounting position is provided.
3. Before plugging the AC cord in the wall outlet, check whether the
AC mains voltage and frequency is the same as this product is
specified for. Whenever your AC plug should not match the wall
outlet, contact you dealer immediately.
4. If fluids have spilled into the unit or small parts have intruded the
unit, immediately switch off the unit and hand it over to the
authorized service for a security check.
5. Disconnect the unit from AC supply by pulling the AC plug out of
the wall outlet or the unit’s AC socket during a thunder-storm in
order to avoid any damage on the unit due to AC voltage peaks.
6. In cause of not correct function of this unit or damaged AC cord or
other damaged parts, pull immediately the AC plug out of the wall
outlet and hand the unit over to the authorized service for a
security check.
7. To meet all aspects of functionality and security during mainte-
nance work to be performed on this unit, all parts should be
replaced by genuine spare parts. Consequently, take care of your
dealer or maintenance company to be authorized by the
manufacturer.
■
Health advice
This unit produces and absorbs electromagnetic radiation. The strength of radiation and
the sensitivity for disturbing interference matches the CE and FCC requirements. A
corresponding sign is printed on the backside of the unit. Any change or modification
may affect the behavior of the unit concerning electromagnetic radiation, with the CE
requirements eventually not to be met any more. The manufacturer takes no
responsibility in this case.
■
Functional advice
This unit is immune to the presence of electromagnetic disturbances – both conducted
and radiated - up to a certain level. Under peak conditions, the unit is classified to show
a “class C” performance criteria and may encounter temporary degradation or loss of
function which may need manual help to recover. In such case, disconnect the AC
power from the unit and reconnect it again to recover.
■
Environmental advice
This unit is build to conform to the ROHS standards and the WEEE
directive 2002/96/EC of the European Parliament and of the Council of
the European Union. Under these regulations, the product shall not be
discarded into regular garbage at the end of its life, but shall be returned
to authorized recycling stations.
User Manual: ZPR4620
6+2 Channel Rack Zoning Mixer
V2.00 (04-2013) © Hill Audio
13
Further to that, this unit does not need regular maintenance. The internal electronics
are protected by a 5x20mm fuse. The fuse can be accessed by the small drawer at the
AC inlet. To change the fuse, unplug the AC cord first, pull out the fuse drawer and
replace the fuse ONLY with a fuse of SAME voltage and rating. If the fuse blows again
after replacement, hand over the unit to qualified service personnel.
■
Technical Data
Mains Input EU version…...……………………………......……………AC220-250V~ 50Hz
Mains Input US version…...……………………………......……………AC110-120V~ 60Hz
Power consumption…………………………………………………………….……max. 24W
Frequency response…………………………….……………………..20Hz-20kHz ±1.0 dBu
S/N………………………………………………………………...……………………….>82dB
THD+N………………………………………………………… ……………..< 0.07% @ 1kHz
Dimensions…...………………………………………………..W 483× H133.5x D 183.5mm
Weight ……………………………………………………………………………………..4.2 kg
■
Standards
This product complies with the following standards:
EU safety...........................................................................................EN 60065:2001 +A1
EU EMC................................................................... EN55103-1:1997, EN55103-2: 1997
US safety ………….…………..………………………………………………………UL60065
US EMC………………………..…………………………………………………..FCC Part 15
This product meets both the EMC Directive 2004/108/EC and the Low Voltage Directive
2006/95/EC.
For further information ask your dealer or visit the website of the manufacturer.