3
WMU-116 Radio Microphone
Introduction
Thank you for choosing the Hill WMU-116 wireless microphone system. This professional set provides a high
quality microphone with a PLL tuned UHF radio system for freedom of movement without loss of audio quality.
Please read this manual before using this equipment in order to avoid damage through incorrect operation
and to get the best performance from your purchase.
Package Contents
• UHF wireless receiver
• 19” rack ears
• UHF antenna
• Handheld transmitter or bodypack receiver with neckband and lavalier microphones
• Mains power adapter
• 6.3mm mono jack lead
• 2 x 1.5V AA battery
If you find any accessory is missing or the product has arrived damaged, please contact your retailer
at once.
There are no user-serviceable parts in this product, so make no attempt to fix or modify this item yourself
as this will invalidate the warranty. We recommend you keep the original package and proof of purchase for
possible replacement or return of the item for service.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using the set immediately, allow unit to dry out and have it checked
by qualified personnel before further use.
Avoid impact or heavy vibration to any of the components. Dropping a microphone can cause capsule failure.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.
Safety
• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as
stated on the adapter.
• Avoid ingress of water or particles into the transmitters or receiver
• Use alkaline or NiMH batteries in the transmitters and remove if they are unused for long periods.
• Observe the correct polarity when replacing batteries
Placement
• Keep all components out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the receiver or transmitters
• If rack-mounting, use the rack ears provided and do not place heavy equipment above the receiver.
• Keep the transmitters and receiver away from damp or dusty environments.
Cleaning
• Use a soft cloth with a neutral detergent to clean the body of the handheld transmitter and receiver.
• Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes.
• To avoid damage, do not use solvents to clean the components.
