Output High Pass filter. This removes all frequencies below 120Hz with an 18dB roll-off from
the internal speaker. Main purpose is to remove low-frequency content when operating with
an additional subwoofer. This high-pass filter complements the low-pass filter (15) for the Link
output (16), so that the internal speaker does not carry content below 120Hz, while a
subwoofer connected to the Link output (16) carries all frequencies below 120Hz.
Power Amplifier Protection Indicator. This LED will come on when the internal power amplifier
limiter is engaged, indicating that the maximum system level is reached. Decrease the signal
level until the indicator is off.
Power indicator. This LED indicates whether the product is switched on or off.
21
23
22
PAGE 7
USER MANUAL - ANDANTE ACTIVE SPEAKERS
Application examples
A. Applications using the internal mixer
Single speaker application for
street performances, product presentations, worship
Dynamic
Mic*
Audio Player
(stereo)
Musical Instrument (mono or stereo)
Multiple speaker application for
conferences, entertainers, larger presentations
14
14
SPEAKER A
SPEAKER B
The function of SPEAKER B
will depend on the setting
of the Link Mode switch on
SPEAKER A:
Link Mode Switch
MONO MIX (switch relea-
sed): both speakers will
play the same mono mix
signal.
STEREO (switch pressed):
Speaker A will play the left
channel of the stereo mix
and speaker B will play the
right channel of the stereo
mix.
* only dynamic microphones
are supported. No phantom
power for condenser mics
available.
Summary of Contents for Andante SMA-1020
Page 1: ...RevA 06 2013...
