background image

SLG5150X/SLG5170X DC Sliding gate opener user manual A1 

 

 

Dear users,   

Thank  you  for  choosing  this  product.  Please  read  this  manual  carefully  before  installation  and  use. 

Please do not forget to include this manual if you send the product to a third party. 

1. Safety Instruction 

 

Please make sure that the power voltage being used matches with the supply voltage of gate opener 

(AC110V or AC220V); kids are not allowed to touch the control devices or the remote-control unit. 

 

The remote-control unit is single button mode or three button mode (please refer to the instructions 

of  the  remote  control  in  accordance  with  the  actual  gate  opener  type).  The  indicator  light  on  the 

remote-control  unit  will  flicker  when  its  button  is  pressed.  Main  engine  and  gate  can  be  unlocked 

with a disengagement wrench and the gate can be manually operated after disengagement. 

 

Please make sure that nobody is around the main engine or gate when the switch is operated. 

Please temporarily stop using the product if the main engine needs to be repaired or regulated. The 

installation and maintenance of the product must be carried out by professionals.

 

 

Please read this manual carefully before installing

using

maintaining or repairing it. Without 

following this manual, any injury or property losses caused by improper use or unauthorized 

modification is out of the responsibility of our company.

 

 

 

 

 

 

Summary of Contents for SLG5150 Series



















Reviews: