background image

20

ONE-YEAR LIMITED WARRANTY

AZ Patio Heater, LLC (“Vendor”) warrants to the original retail purchaser of this heater to no other 

person, that if this heater is assembled and operated in accordance with the printed instructions 

accompanying it, then for a period of one year from the date of purchase, all parts in such heater 

shall be free from defects in manufacturing and workmanship. Vendor may require reasonable 

proof of your date of purchase from an authorized retailer or distributor. Therefore, you should 

retain your sales slip or invoice. This limited Warranty shall be limited to the repair or replacement 

of parts, which prove defective under normal use and service and which the vendor shall determine 

in its reasonable discretion upon examination to be defective. Before returning any parts, you should 

contact Vendors customer service department using the contact information listed below. If Vendor 

confirms, after examination a defect covered by this limited warranty in any returned part, and if

Vendor approves the claim, Vendor will replace such defective part without charge. If you return 

defective parts, Transportation charges must be prepaid by you. Vendor will return replacement 

parts to the original retail purchaser, Freight or postage prepaid.

The limited Warranty does not cover any failures or operating difficulties due to accident, abuse, 

misuse, alteration, misapplication, improper installation or improper maintenance or service by you 

or third party. The failure to perform normal and routine maintenance on the product, shipping, 

damage, abnormal adjustment to the burner, damage or repairs related to insects, birds, or animals 

of any kind, and damage due to weather conditions as set out in this owner’s manual. In addition, 

the Limited Warranty does not cover damage to the finish such as scratches, dents, discoloration, 

rust or weather damage, after purchase. Please protect your investment.

The limited Warranty is in lieu of all other warranties offered by any retail company. Vendor disclaims 

all warranties for products that are purchased from sellers other than authorized retailers or distributors. 

AFTER THE PERIOD OF THE 1 YEAR WARRANTY, VENDOR DISCLAIMS ANY AND IMPLIED 

WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER, VENDOR SHALL 

HAVE NO LIABILITY WHATSOEVER TO PURCHASER OR ANY THIRD PARYY FOR ANY SPECIAL, 

INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTAL DAMAGES. Vendor assumes no 

responsibility for any defects caused by third parties. This limited warranty gives the purchaser 

specific legal rights; a purchaser may have other rights depending upon where he or she lives. 

Some jurisdictions do not allow the exclusion or limitation of special, incidental or consequential 

damages, or limitations on how long a warranty lasts, so the above exclusion and limitations may 

not apply to you.

Vendor does not authorize any person or company to assume for it any other obligation or

liability in connection with the sale, installation, use, removal, return, or replacement of its

equipment, and no such representations are binding on vendor.

For warranty service, please contact [email protected] or call us toll free at

888-775-1330.

Distributed by:

AZ Patio Heaters, LLC

Toll Free Number 

1-888-775-1330

Sales Service and Repair

www

.azpatioheaters.com

Summary of Contents for HLDS01-GTCB






















Reviews: