HIKVISION UD08391B, User Manual, Page: 92 / 139

Network Camera User Manual
83
complete Email setup in advance.

Upload to FTP/Memory Card/NAS
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
Notes:
●
Set the FTP address and the remote FTP server first. Refer to
Section 7.2.2
Configuring FTP Settings
for detailed information.
●
Go to Configuration > Storage > Schedule Settings> Capture > Capture
Parameters page, enable the event-triggered snapshot, and set the capture
interval and capture number.
●
The captured image can also be uploaded to the available SD card or network
disk.

Trigger Channel
The video will be recorded when the motion is detected. You have to set the
recording schedule to realize this function. Please refer to
Section 11.1
for
detailed information.

Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, please refer to
Section
9.1.4 Configuring Alarm Output
to set the related parameters.

Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
each area for different day/night switch.