Network Camera User Manual
21
Configure System Settings
Purpose:
Follow the instructions below to configure the system settings, include System
Settings, Maintenance, Security, and User Management, etc.
Configuring Basic Information
Enter the Device Information interface:
Configuration
>
System
>
System Settings
>
Basic Information
.
In the
Basic Information
interface, you can edit the Device Name and Device No..
Other information of the network camera, such as Model, Serial No., Firmware
Version, Encoding Version, Number of Channels, Number of HDDs, Number of
Alarm Input and Number of Alarm Output are displayed. The information cannot be
changed in this menu. It is the reference for maintenance or modification in future.
Online Upgrade
For some camera models, when memory card is mounted, you can click the
Update
button that appears on the right of
Firmware Version
text field to see if there is a new
version available. If a new version is available, the version number will be displayed
in the
New Version
text field below, and you can click the
Upgrade
button to upgrade
the firmware for the camera.
Online Upgrade
Note:
When the camera is upgrading, don't power off the camera. During upgrading,
the camera may not be accessible. You need to wait 1 or 2 minutes before the upgrade
finishes.
Summary of Contents for UD08391B
