Network Speed Dome
·
Quick Start Guide
12
2).
Remove the in-ceiling bracket as shown in Figure 2-16.
Figure 2-16
Remove the Bracket
3).
Install four bolts to the screw holes as shown in Figure 2-17.
Figure 2-17
Install the bolts
2.
Route the cables. The cables of speed dome can be routed either from the top or the
side of the back box, as shown in Figure 2-18. For the cables routed from the top of
the back box, it is required to drill a cable hole in the ceiling.
Figure 2-18
Cabling for Ceiling Mounting
3.
Install the speed dome.
1).
Rotate the bubble counterclockwise to separate it from the back box.
2).
Remove the protective lens cover, foam, and sticker from the dome drive.