Network Speed Dome
·
Quick Start Guide
10
5.
Drill a hole on the ceiling according to the drill template (supplied).
Note:
±2 mm of the circle diameter is tolerable.
Φ 224
Unit: mm
Figure 2-11
Drill a Hole on the Ceiling
6.
Connect the cables.
7.
Install the speed dome to the ceiling.
1).
Loosen the two lock screws on both sides of the back box and make the locks in
internal position as shown in Figure 2-12.
Lock
Lock
Figure 2-12
Locks and Lock Screws
2).
Push the speed dome into the mounting hole in the ceiling.
3).
Tighten the lock screws with the screwdriver and the locks will automatically
rotate outwards to secure the in-ceiling bracket to the ceiling.
Lock
Ceiling
Figure 2-13
Install the Back Box
8.
Install the flange.