Thermometric Network Bullet Camera User Manual
82
1:35m
2:45m
3:6m
4:4m
Figure 5-51
Draw on Live View Window
3.
Draw the
Shield Region
The shield region allows you to set the specific region in which the behavior analysis
will not function. Up to 4 shield regions are supported.
Steps:
1)
Enter the Shield Region setting interface:
Configuration > VCA Configuration > Shield Region
2)
Click
Draw Area
. Draw area by left click end-points in the live view window,
and right click to finish the area drawing.
Notes:
●
Polygon area with up to 10 sides is supported.
●
Click
Delete
to delete the drawn areas.
●
If live view is stopped, there is no way to draw the shield regions.
3)
Click
Save
to save the settings.
4.
Configure the
Rule