Thermometric Network Bullet Camera User Manual
69
Figure 5-41
Video Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the video tampering
detection.
3.
Set the video tampering area. Refer to
Task 1 Set the Motion Detection Area
in
Section 5.6.1.
4.
Click
Edit
to edit the arming schedule for video tampering. The arming schedule
configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Task 2 Set the Arming Schedule for Motion Detection
in
Section 5.6.1.
5.
Check the checkbox to select the linkage method taken for the video tampering.
Audible warning, notify surveillance center, send email and trigger alarm output
are selectable. Please refer to
Task 3 Set the Alarm Actions for Motion Detection
in
Section 5.6.1.
6.
Click
Save
to save the settings.
5.6.3
Configuring Alarm Input
Purpose:
It detects the alarm input, and take response actions when the alarm is triggered.
Steps: