Network Multi-Sensor Panoramic Dome Camera
39
Note:
The Baud Rate, PTZ Protocol and PTZ Address parameters should be exactly
the same as the PTZ camera parameters.
Figure 5-8
RS-485 Settings
5.2.5
Panoramic Parameters
Purpose:
This camera is equipped with multi-sensors. You can view the images coming from
every sensor separately. Or you can view a stitched panoramic live view image by the
live view images coming from all the sensors.
Steps:
1.
Enter the Panoramic Parameters setting interface:
Configuration > System > System Settings > Panoramic Parameters
2.
Select the desired image mode according to your actual need. Original Image and
Panoramic Image are selectable.
Figure 5-9
Panoramic Parameters Setting
Original Image:
Live view images from four sensors will be shown separately.