Network Multi-Sensor Panoramic Dome Camera
37
(4)
(Optional) You can check
Sync. with computer time
item to synchronize
the time of the device with that of the local PC.
3.
Click
Save
to save the settings.
DST
Purpose:
For region using the summer time, DST (daylight saving time) settings can be
configured according to the actual needs.
Steps:
1.
Enter DST Settings interface:
Configuration > System > System Settings > DST
2.
Check the checkbox of
Enable DST
to enable daylight saving time.
3.
Set the start time and end time for the DST period.
4.
Select the DST bias from the drop-down list.
5.
Click
Save
to save the settings.
Figure 5-6
DST Settings
5.2.3
RS232 Settings
The RS232 port can be used in two ways:
Parameters Configuration: Connect a computer to the camera through the serial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port
parameters of the camera.
Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.