UM DS-2CE16D0T-WL5 061818NA
2018 Hikvision USA Inc.
4.
Attach the bracket to the wall and secure the camera with
supplied screws.
Figure 2, Secure the Camera to the Wall
Note:
•
The supplied screw package contains both self-tapping screws and expansion
bolts.
•
If the wall is cement, expansion bolts are required to fix the camera. If the wall is
wood, self-tapping screws are required.
5.
Align the camera to the pedestal, and secure the camera on
the pedestal with supplied screws.
Figure 3, Secure the Camera on the Bracket
Note:
Drawings are for illustration purposes only; your camera may appear different.
6.
Route the cables and connect the corresponding power cord
and video cable.
7.
Power on the camera to check whether the image on the
monitor is at an optimum angle. If not, adjust the camera
according to the figure below to get an optimum angle.
1).
Loosen the horizontal adjusting screw to adjust the pan
position (0° to 360°).
2).
Tighten the horizontal adjusting screw.
3).
Loosen the vertical adjusting screw to adjust the tilt
position (0° to 90°)
4).
Tighten the vertical adjusting screw.
Figure 4, Angle Adjustment
2.2.3
Pendant Mounting
Before you start:
You must purchase a pendant bracket.