UM DS-2CE16D0T-WL5 061818NA
2018 Hikvision USA Inc.
Regulatory Information
FCC Information
FCC Compliance:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that
may cause undesired operation
EU Conformity Statement
This product and, if applicable, the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized
European standards listed under the EMC Directive 2014/30/EU, the
RoHS Directive 2011/65/EU.
2012/19/EU (WEEE Directive)
: Products marked with this symbol cannot
be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions.”
Warnings:
Serious injury or death may occur if any of the warnings are neglected.
Cautions:
Injury or equipment damage may occur if any of the cautions are
neglected.
Warnings
Follow
Cautions
Follow these
these safeguards to
precautions to prevent
prevent serious injury
potential injury or
or death.
material damage.
Warnings
•
In the use of the device, you must be in strict compliance with the electrical
safety regulations of the nation and region.
•
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the
Limited Power Source with 12 VDC according to the IEC60950-1 standard. Refer
to technical specifications for detailed information.
•
Do not connect multiple devices to one power adapter to avoid overheating or
fire hazard caused by overload.
•
Make sure that the plug is firmly connected to the power socket.
•
Make sure that the device is firmly fixed if wall mounting or ceiling mounting is
adopted.