Figure 2-20
Remove the Bubble
4.
Fix the mounting base on the ceiling with supplied
screws.
Figure 2-21
Fix the Mounting Base
5.
Route the cables through the cable hole, or the side
opening.
6.
Connect the corresponding cables, such as power
cord, and network cable.
7.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle
Adjusting Screw
0° to 355°
0° to 75°
0° to 355°
Figure 2-22
Type I Camera 2-Axis Adjustment
1).
Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2).
Hold the black liner to adjust the pan position [0°
to 355°].
3).
Hold the camera body to adjust the rotation
position [0° to 355°].
8.
Reinstall the bubble, and tighten the screws.
Figure 2-23
Bubble Reinstallation