not, adjust the camera according to the figure below
to get an optimum angle.
Tilt Position
[0° to 75°]
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
Figure 2-14
3-axis Adjustment
1).
Hold the camera body, and rotate the enclosure
to adjust the pan position [0° to 360°].
2).
Move the camera body up and down to adjust
the tilt position [0° to 75°].
3).
Rotate the camera body to adjust the rotation
position [0° to 360°].
2.3
Installation of Type I and Type II Camera
2.3.1
Ceiling/Wall Mounting with Junction Box
Steps:
1.
Paste the drill template on the ceiling/wall.
2.
Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Type I Camera
Type II Camera
Figure 2-15
Drill Template of the Junction Box
Note:
Drill the cable hole, when adopting the ceiling
outlet to route the cable.
3.
Take apart the junction box, and align the screw
holes of the turret camera’s mounting base with
those on junction box’s cover.
4.
Fix the mounting base on junction box’s cover by
supplied screws.
5.
Secure the junction box’s body with supplied screws
on the ceiling/wall.
6.
Combine the junction box’s cover with the junction
box’s body.
Junction Box Body
Junction Box Body
Junction Box Cover
Figure 2-16
Fix the Gang Box
7.
Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to install the camera to the
junction box.
2.3.2
Wall Mounting
Before you start:
You need to purchase a wall mount first.